QuestTel's centralized HD-SDI Optical Fiber Receiver Chassis System provides up to 16 plug-in cards and 1 management card with CLI and SNMP V1/V2 support to perform perfect management functions. The L-16TC-SDI-FE-RX is 19 inch rack mounting chassis, with 3 fans and dual power supplies to support power redundant protection.
| Video Interface | |
| Connector | BNC |
| Fiber Connector | ST/PC |
| Bit rate | 1.485Gb/s and 270Mb/s auto adaptive |
| Impedance | 75Ω |
| Return loss | >15dB |
| Rise and fall time HD-SDI | ≤270ps |
| Rise and fall time SD-SDI | ≤1.50ns |
| SD-SDI Alignment jitter (1KHz) | ≤0.2UI |
| SD-SDI Timing jitter (10Hz) | <0.2UI |
| HD-SDI Alignment jitter (100KHz) | ≤0.2UI |
| HD-SDI Timing jitter (10Hz) | <1.0UI |
| Standard | Comply to SMPTE-292M HD-SDI and SMPTE-259M SD-SDI standard |
| RS485 Interface | |
| Connector | PHOENIX connector |
| Baud rate | 0~115.2Kb/s |
| Bit error ratio | <10-9 |
| Duplex | Half-duplex |
| CONSOLE Interface | |
| Connector | RJ45 |
| Baud rate | 19200 |
| bits | 8 |
| Stop bit | 1 |
| parity check | None |
| EMU/EMU-EX Interface | |
| Connector | RJ45 |
| Bit rate | 10Mb/s or 100Mb/s auto adaptive |
| Environment Requirements | |
| Working temperature | -30~60°C |
| Relative Humidity | ≤95%, no condensation |
| Storage temperature | -40~85°C |
| Equipment dimension | 330mm × 178mm × 482mm |
Pdf User Manual: L-16TC-SDI-FE-RX
Disclaimer: Products, specifications and data are subject to change without notice, to improve reliability, function, design or otherwise.
