QuestTel's L-1SDI/2IP-FE-TX/RX HD-SDI & Ethernet compact fiber extender provides transmission of one HD-SDI channel with AUX audio and two Ethernet IP channels over singlemode and multimode optical cables. This SDI and IP to optical fiber converter enables high optical performance and brilliant HD video processing in real time. Since optical signals are not affected by electromagnetic noise, L-1SDI/2IP-FE-TX/RX makes your system more reliable and secure. These kits also provide transmission of two bi-directional Ethernet channels, which share 100M bandwidth. The unit has RS485 (optional RS422/RS232) reversed data channel for advanced camera control, making itself the best compact factor solution for any HD surveillance system or live broadcasting application. IP interfaces can dramatically increase scalability and compatibility with all modern high-end networking systems. All things considered, L-1SDI/2IP-FE-TX/RX pushes the limits of conventional coax cctv or broadcast system to a completely new level and allows you to extend transmission distances up to 20km(optional 40/60/80km).
| Video Interface | |
| Connector | BNC |
| Fiber Connector | ST/PC |
| Bit rate | 1.485Gb/s and 270Mb/s auto adaptive |
| Impedance | 75Ω |
| Return loss | >15dB |
| Output level | 800mVp-p±10% |
| Rise and fall time HD-SDI | ≤270ps |
| Rise and fall time SD-SDI | ≤1.50ns |
| SD-SDI Alignment jitter (1KHz) | ≤0.2UI |
| SD-SDI Timing jitter (10Hz | <0.2UI |
| HD-SDI Alignment jitter (100KHz) | ≤0.2UI |
| HD-SDI Timing jitter (10Hz) | <1.0UI |
| Standard |
Comply to SMPTE-292M HD-SDI and SMPTE-259M SD-SDI standard |
| Audio Interface (Optional) | |
| Connector | PHOENIX connector |
| Impedance | Input high-impedance, output 600Ω |
| Quantization grade | 20bits |
| Sample frequency | 48KHz |
| Audio input/output voltage | 2VP-P |
| Bandwidth | 20Hz~20KHz |
| Total Harmonic Distortion | 0.1% |
| Impedance | 600Ω |
| FE Interface | |
| Connector | RJ45 |
| Frame length | From 64 bytes to 1552/1536 bytes |
| Working mode | Auto-negation by default |
| Bit rate | 10/100Mb/s |
| Duplex | Half/full duplex |
| Port VLAN |
Default settings: closed. All the port share the same LAN. |
| Flow Control | Default settings: open |
| Standard |
IEEE802.3u 100Base-TX / IEEE 802.3 10Base-T |
| RS485 Interface | |
| Connector | PHOENIX connector |
| Baud rate | 0~115.2Kb/s |
| Bit error ratio | <10-9 |
| Duplex | Half-duplex |
| CONSOLE Interface | |
| Connector | RJ45 |
| Baud rate | 19200 |
| bits | 8 |
| Stop bit | 1 |
| parity check | None |
| EMU/EMU-EX Interface | |
| Connector | RJ45 |
| Bit rate | 10Mb/s or 100Mb/s auto adaptive |
| Power and Consumption for desktop equipment | |
| Power supply | DC 12V |
| DC input voltage range | 8V~14V |
| Power consumption | 3W±10% |
| Power and Consumption for rack mounting chassis | |
| Power supply | AC 220V /DC-48V |
| DC input voltage range | -36~-72V DC |
| AC input voltage range | 176~264V |
| Power consumption for each card | 3W±10% |
| Environment Requirements | |
| Working temperature | -30~60°C |
| Relative Humidity | ≤95%, no condensation |
| Storage temperature | -40~85°C |
| Equipment dimension | |
| Dimension of Rack mounting chassis (with rack ear) | 330mm x 178mm x 482mm |
| Desktop equipment dimension | 180mm x 123mm x 30mm |
SDI and IP over Fiber Promo Page
Disclaimer: Products, specifications and data are subject to change without notice, to improve reliability, function, design or otherwise.
